Brainboxes BL-830 Manual do Utilizador

Print Date: 24/05/2005 Brainboxes Limited, Unit 3C, Wavertree Boulevard South, Wavertree Technology Park, Liverpool, L7 9PF, UK Tel: +44 (0)151 220

3.5. Using the Configuration Utility The Configuration Utility will display allowing selection of the appropriate COM port settings for the Ad

The application will now load. There may be a short delay whilst the device is detected and its current configuration is queried and the appropr

3.6. Current Settings The Current Settings section is broken down into two sections; Local Device Settings and Partner Device Settings. Each f

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 13 of 41 PIN Code The PIN (Personal Identification Number) is used to creat

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 14 of 41 Connect Using Clicking the arrow on the far right of this field show

3.7. Advanced Settings The Advanced Settings section contains a more detailed range of settings that are least likely to require modification f

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 16 of 41 Security Mode The factory set security mode is 3 (Highest). This fi

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 17 of 41 Switch Role This Function will allow an RS-232 Bluetooth Adapter to

Low Power Mode This setting allows the selection of either Park or Sniff low power modes. These can be used to reduce the power consumption of

3.8. Default settings The “Default Settings” section is simply a display page showing all the configuration options either as they were set in

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 2 of 41 1. INTRODUCTION...

4. Alternative Product Configuration 4.1. Accessing the configuration menus and commands. The adapter’s configuration menu is available at any

Select the Port that you have connected the adapter to. All other fields will then be “greyed out” then Click OK. Select the communication

4.2.2. Main Menu Sending the “Enter” character to the adapter accesses its main menu. This is also sometimes referred to as “Carriage Return”.

Next the user is prompted to set the adapter’s Parity. Options here are None, Odd or Even. “Esc” skips this selection leaving the current set

The Currently configured partner device is shown (if any). The user is then prompted to enter a new partner device address. To keep the same pa

The first screen that displays shows the current state of the adapter’s settings. If any settings have been modified by the user following the

4.2.8. Upgrading Firmware 3.0 This feature is only available from firmware version 3.0 onwards. Upgrade DFU (Device Firmware Upgrade) is an

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 27 of 41 4.3. Command Interface This interface has been developed primarily

5. Remote Configuration One of the great features of Brainboxes RS-232 Bluetooth Adapters is the ability to be remotely configured. For example

7. Upgrading your device If you have installed the Configuration Utility already, the Upgrade application will also have installed and a shortc

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 3 of 41 10.1. SCIENTIFIC EQUIPMENT DATA LOGGING: ...

Select the COM port to which you have connected your product. (Remember to close the Configuration Utility or Hyper Terminal application if you

Assuming you have selected the correct options, the wizard will detect the product connected to the selected port and begin the upgrade. This

8. Physically connecting to your RS232 device 8.1. Configuring the communications parameters. The adapters do not have the ability to auto-det

9. Connecting adapters over Bluetooth. There are 3 scenarios in which adapter can be connected via Bluetooth. This section details all 3 method

9.1.2. Configuration by Menu Select option 2 from the “Main Menu” menu to display the Bluetooth settings menu shown below left. You should

Access the Adapter you wish to change to “Client” for command mode as documented above and send the following commands: padd = 000A-4F-00082D&l

9.3.4. Secure the relationship This is where you must “Bond” or “Pair” with the device. This is a feature of Bluetooth, which allows secure co

9.3.6. Connect your application to the new COM port In our initial testing at our labs, we use the HyperTerminal application included in Window

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 38 of 41 12. Troubleshooting In the rare occasion that you experience diffic

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 39 of 41 13. Technical Specifications Qualified Output Power: > 0 dBm &l

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 4 of 41 1. Introduction 1.1. Preamble Brainboxes’ RS232 Bluetooth adapters

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 40 of 41 14. Regulatory Information Bluetooth product operating in 2.4GHz ba

Manual for BL-819 / 830 © Copyright Brainboxes Limited 2005 Page 41 of 41 Version History Version Date Author Checked By Comments 1.0

2. Physical Product Features 2.1. BL-819 / 830 Reset button See section 6 for more details on how to use the reset button. LED The Green L

3. Product Configuration This device contains a comprehensive set of Bluetooth and COM port features which can be changed from an easy to use W

3.3. Opening the Configuration Applications After attaching your Adapter to an available COM port on your Computer, either start the applicatio

This Screen will allow you to change the RS-232 Port settings for communication to the Adapter. Baud Rate, Parity and Stop Bits can be chang

The Low power modes can be turned on or off here. The settings button will allow you to configure the particular parameters that are used fo