Brainboxes UC-464 Manual descarregar pdf (Página 9)

Serial Solutions Range Product

Manual

Hardware Handshaking

/H,4

Type 4,3 Wire Handshake selected for all ports.

Modifying Command Line Parameters.

When “assembled” the NEWCOM.SYS command line looks like…

DEVICE=NEWCON.SYS /A5-8,0140 /L 0140,11,5-8 /B8 /S 512 /H,4 …and should be entered into the

CONFIG.SYS file. Once you are sure that these parameters have been entered correctly, restart your PC

and your PCI Quad RS232 should be ready to use immediately.

Sample terminal applications are provided on “Serial Solutions Disk 1 & 2” enabling communications to be

established to your peripherals quickly and easily.

PCI Lynx 8 Port RS232 Users: When “assembled” the NEWCOM>SYS command line looks like:

DEVICE=NEWCOM.SYS /A5-12, 0140 /L0104,11,5-12 /B12 /S512 /H,4

2.2. NT Installation

Insert the PCI Multiport Card into your PC, and restart. Place the supplied CD disc titled “Serial Solutions” in

a suitable drive and from the start menu choose Run and enter a:\SSNT\setup.exe (where a: is the path to

the CD drive).

Install shield will then install the driver software automatically – it will then copy the necessary files and start

itself. This automatically detects your new PCI serial card(s) and does not require any further system

restarting.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 46 47

Sem comentários

Brainboxes UC-464 Manual Página 9