Brainboxes BL-554 Manual descarregar pdf (Página 30)

BL-521 manual Release Rev5.doc © Copyright Brainboxes Limited 2003 Page 30 of 54

Selecting 0 immediately returns you to the previous menu storing any changes; selecting any other option will

store the appropriate configuration selection.

The default configuration of your BL-521 is set to “Server” operation. This means that the BL-521 will wait for

devices to connect to it. Changing this setting to “Client” will put the BL-521 into a state where it will attempt to

connect to the device contained in its internal database. This remote device is entered into BL-521 using the

previous menu option, or by pairing with BL-521 from the remote device whilst BL-521 is in server mode.

It is this option that requires interaction if you wish to configure 2 BL-521’s to communicate to each other to

create a “true” cable replacement scenario.

Unlike most other Bluetooth settings, the BL-521 requires re-booting before this option will be enabled.

3.3.7. Local Device Name

In scenario’s where more than 1 BL-521 are to be used in the same geographical location (i.e. they are all in

range of each other/the controlling device), it may be pertinent to change the name of each device to more easily

identify each individual device.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 53 54

Sem comentários

Brainboxes BL-554 Manual Página 30