Brainboxes BL-554 Manual descarregar pdf (Página 51)

BL-521 manual Release Rev5.doc © Copyright Brainboxes Limited 2003 Page 51 of 54

This will display a serial port service called “Serial 01”

Double clicking this service (or right clicking and selecting the “connect” option), will create a COM port style

connection to the BL-521.

The screen shot below shows that the port in our example here is listed as COM25, although yours will most

likely be a much lower number than this.

This “COM” port is now available for any application to use to communicate with your device, or in our case, the

oscilloscope.

5.2.4. Connect your application to the COM port

In our initial testing at our labs, we used the HyperTerminal application included in Windows to open COM10.

Setting HyperTerminal to save data to a file called screen.bmp, and activating the hardcopy feature of the

oscilloscope, caused all data to be sent from the scope to the file as listed. This file could then be viewed using

any picture editing software and displays an exact screen copy of the oscilloscope. Instructions for using

HyperTerminal can be found in section 2.1 above

5.3. Client: BL-521 is the Bluetooth device which initiates the connection

The instructions in the above section for creating a “cable replacement” connection should be followed to place the

BL-521 into Client Mode in order to initiate a connection to a remote device.

1 2 ... 46 47 48 49 50 51 52 53 54

Sem comentários

Brainboxes BL-554 Manual Página 51