Brainboxes BL-554 Manual descarregar pdf (Página 48)

BL-521 manual Release Rev5.doc © Copyright Brainboxes Limited 2003 Page 48 of 54

Select the client option. This setting is stored immediately and is not discarded upon a reboot. In fact it requires a

re-boot in order to activate it.

Re-boot. When the Client BL-521 is switched on, it will connect to the Server device you have entered in the

menu above, assuming of course that the server device is also powered up.

That’s it - it really is that simple.

5.2. Server : Connecting TO BL-521 from a remote Bluetooth device.

Connecting to your BL-521 will vary depending on your application, but will usually consist of 3 Steps.

1 – Configuring the BL-521’s communications parameters.

2 – Physically connecting BL-521 to your device.

3 – Connecting to BL-521 from a remote device via Bluetooth and transferring data.

There are many different scenarios whereby a connection can be made to a BL-521 and consequently its attached

device. The application scenarios will also depend on what sort of device you have attached to the BL-521. One

worked example is shown here for illustrative purposes, but the principle will be the same regardless of the device

you are connecting to except perhaps the cabling

arrangements your device might require.

In this example we have connected a Tektronix

TDS220 Oscilloscope to a BL-521 and plugged in

the power adapter included. No additional cables or

gender changers were used in this application

scenario. In order to communicate to the scope/BL-

521 we have connected a Brainboxes USB adapter

(Order code BL-554) to a laptop with Brainboxes

Bluetooth software suite installed. If you are

connecting to BL-521 with a different manufacturers

Bluetooth product, please refer to the manufacturers

instructions for that product.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54

Sem comentários

Brainboxes BL-554 Manual Página 48